冷拉型鋼相對普通鋼材來說各方面的性能已經有了很大的改善,但是在長期使用中依然會出現一些缺陷,因?yàn)樗谋砻婧幸欢ǖ匿撹F成分,長期暴露在空氣中的話會因?yàn)檠趸艿讲煌潭鹊那治g。
Compared with ordinary steel, cold-drawn section steel has greatly improved its performance in various aspects, but some defects will still appear in long-term use, because its surface contains a certain amount of steel components, and long-term exposure to air will cause Oxidation and different degrees of erosion.
冷拉型鋼自身的抗沖擊能力雖然很高,但產品表層也會存在一些銹漬,所以為了提高冷拉型鋼的產品品質,延長它的使用壽命,應該要考慮到這些因素,對其采用磷化的措施。具體的操作方法是將鋁材料或鍍鋅成分涂抹在冷拉型鋼的缺陷處,并使得整件在磷化的過程中迅速的轉換成化學膜,從而形成磷化膜。與此同時,冷拉型鋼的磷化處理屬于化學與電化學的一種反應,能夠在原有的基礎上提高金屬物的密度,使得冷拉型鋼有效的抵制被腐蝕的現象。
Although the cold-drawn steel's own impact resistance is very high, there will also be some rust stains on the surface of the product. Therefore, in order to improve the product quality of cold-drawn steel and extend its service life, these factors should be taken into consideration and phosphating Measures. The specific operation method is to apply an aluminum material or a galvanized component to the defects of the cold-drawn steel, and make the whole piece be quickly converted into a chemical film during the phosphating process, thereby forming a phosphating film. At the same time, the phosphating treatment of cold-drawn steel is a reaction between chemistry and electrochemistry, which can increase the density of metal objects on the original basis, so that cold-drawn steel can effectively resist the phenomenon of corrosion.
冷拉型鋼在冷拔之前,應該要設置擋板進行防護,如果沒有準備擋板也應該讓卷揚機和冷拉方向保持90度,并且要使用封閉式的導向滑輪。在操作的時候,工作人員必須站在防護擋板的后方,防止冷拉時產生的碎屑蹦出。另外還要對設備進行全面的檢查,如果發現滑動或者是其他異常問題的時候,先停止機器的操作,放開鋼筋之后才能讓專業的人員進去檢查,避免事故的發生。
Before the cold-drawn section steel is cold-drawn, a baffle should be provided for protection. If the baffle is not prepared, the hoist and the cold-drawing direction should be maintained at 90 degrees, and a closed guide pulley should be used. During operation, the staff must stand behind the protective baffle to prevent the debris generated during cold drawing from jumping out. In addition, a comprehensive inspection of the equipment should be carried out. If sliding or other abnormal problems are found, stop the operation of the machine first, and then let the professional staff go in to check after the steel bars are released to avoid accidents.